Back to the journal
Looki Not Connecting? How to Re-Pair Your Device

Looki Not Connecting? How to Re-Pair Your Device

Follow this step-by-step guide to check your connection, remove the old pairing, and reconnect through the Looki App.

If your Looki L1 shows Disconnected in the Looki App, try the checks below first. If it still will not connect, follow the four steps to remove the old pairing and reconnect.

Looki App showing the Looki L1 disconnected status
Check whether the Looki App shows your L1 as Disconnected.

Before You Start

  • Check power and distance. Make sure your L1 is powered on and charged, and keep it close to your phone.
  • Check Bluetooth access. Turn on Bluetooth on your phone. If the Looki App asks for Bluetooth or nearby-device access, allow it in your phone’s settings.
  • Reopen the app. Close the Looki App completely, open it again, and check your device’s connection status. If it reconnects, stop here.
  • Switching phones? You will need to remove the pairing from the previous phone first. Looki L1 supports one phone connection at a time.

Check Your Media Before Unpairing

A Bluetooth connection alone does not confirm that your recordings have uploaded. Captured media is stored on L1 first.

Before removing the pairing, check that any important recordings have uploaded. If you cannot confirm this, pause here and contact Looki Support before unpairing.

Unpairing and a factory reset are different actions. Do not choose Factory Reset as a substitute for the steps below.

How to Re-Pair Your Looki L1

Complete these steps in order. If you are switching phones, do steps 1 and 2 on the previous phone, then use the new phone for step 4.

1 Unpair L1 in the Looki App

In the Looki App Device page → Settings → System → General → Unpair device

  1. Open the Looki App and go to your L1’s device page.
  2. Open Settings, then tap System → General → Unpair device.
  3. Read the confirmation message. Continue only after checking your important recordings as described above, then confirm that you want to unpair.
Unpair device option in the Looki App
Choose Unpair device, then review the confirmation message.

2 Forget L1 in Your Phone’s Bluetooth Settings

Next, remove the saved L1 pairing from your phone. This is separate from unpairing in the Looki App.

On your phone Bluetooth settings → your Looki L1 → device details → Forget / Unpair

Open your phone’s Bluetooth settings, find your L1, and open its device details. Choose Forget or Unpair, then confirm if prompted. The exact menu names may vary by phone.

If L1 is not listed among your saved Bluetooth devices, continue to step 3. Start the new pairing in the Looki App in step 4.

3 Put L1 Into Pairing Mode

With your L1 powered on, press the A and B buttons together twice in quick succession  to enter pairing mode. Keep the device close to the phone you want to use.

4 Pair Again in the Looki App

  1. Open the Looki App on the phone you want to connect to.
  2. Start device setup from the app’s device connection screen. When your L1 appears, select it.
  3. Follow the setup prompts and accept any Bluetooth pairing or access requests needed to finish connecting.
Looki App device connection screen for pairing L1 again
Select your L1 in the Looki App and complete the setup prompts.

Check that it worked: Return to your L1’s device page in the Looki App. Check that it shows the device as connected and displays its current status. A saved entry in your phone’s Bluetooth list alone does not confirm a working app connection.

Still Not Connecting?

If L1 does not appear during setup or the app still shows Disconnected, contact Looki Support. Include your phone model, iOS or Android version, Looki App version, a screenshot of any error, and the step where you got stuck. Mention whether important recordings may still be stored only on L1.

Frequently Asked Questions

Can I connect Looki L1 to two phones at the same time?

No. L1 supports one phone connection at a time. Unpair it from the previous phone before connecting it to another.

Why is L1 listed in Bluetooth while the Looki App says Disconnected?

A saved Bluetooth pairing can remain in your phone’s device list even when the app has no active connection. Check the status in the Looki App. If closing and reopening the app does not help, check your media before following the re-pairing steps above.

Is re-pairing the same as a factory reset?

No. Re-pairing sets up the connection between L1 and your phone again. A factory reset is a separate operation that may affect locally stored content. This guide does not require a factory reset.

Explore Looki L1 to capture moments from your day, or join our Discord community to ask questions and share your experience.

Share this story

Guide

View all

0 comments

Leave a comment